Contact Us

Call UsEmail Us
Detailed demolition and strip-out icon

Detailed Demolition Sydney

Selective takes, tight work, and leaving the bits that have to stay

Detailed demolition Sydney work is the job where a full knock-down would be the wrong tool. We take out what the brief says and leave the rest standing, without wrecking the neighbours or the bit you are keeping.

Detailed Demolition Sydney – Elite Demolition & Excavation Sydney & Central Coast

How this job runs

Detailed work is slower on purpose. You might be keeping a facade, a party wall, or a floor that the next fit-out needs. The machine still comes, but a lot of the take is hand work: services, linings, a stair, a rear room that has to come off clean. The waste still has to leave the street without blocking it all day.

This sits next to a strip-out, and on some sites it is both. The difference is usually how much structure comes with it. A strip-out can be linings and a kitchen. Detailed demolition can be a slab edge, a brick wing, or a first-floor addition while the ground floor stays live. We look at that on site, not from a floor plan alone.

If the whole interior is coming out and the shell stays, that is closer to strip-out and defit. If the whole house is coming down, that is a full demolition. We will tell you which page matches the job.

We inspect, then we quote. Photos of the rooms, the street, and what has to stay are more useful than a long written brief. Call 0487 549 909 or send the suburb and a couple of photos.

From first look to handover

  1. 01

    Mark what stays

    The brief has to be clear: which walls, which floors, which services. We will not guess that from the footpath.

  2. 02

    Protect and isolate

    Dust, neighbours, and the bit you are keeping get planned before the first bar comes off.

  3. 03

    Take only what was quoted

    The waste leaves. The structure that stays is left so the next trade can work, not so someone else has to make it safe.

Other demolition work

Full and partial house demolition

Full knock-downs, including the slab when that is the brief, and taking out part of a house while the rest stays

Interior demolition and strip-out

Kitchens, bathrooms, linings, and internal structure with the shell left standing

Tight access and hand demolition

Terraces, laneways, and confined sites where the machine has to fit the driveway

Back to Demolition

This sits under Demolition. If the job also needs another trade on the same site, say so on the quote. We inspect, then we quote.

Read the demolition page

Ready to get started?

Send the suburb, a short note on the detailed demolition and strip-out, and a couple of photos. We look at the site before we put a number on it. Call 0487 549 909 or use the contact form.

Detailed demolition and strip-out FAQs

What is detailed demolition compared with a full knock-down?

A full knock-down takes the building. Detailed demolition takes a listed part of it and leaves the rest. More hand work, more protection, same licences.

Can you work while part of the building stays occupied?

Sometimes. It depends on dust, access, and what is coming out. We will tell you if that is realistic after we see the site.

Do you need the same demolition licence for a partial take?

Yes. NSW demolition licence AD214505 covers the work. The method changes. The ticket does not.

Locations We Serve